Operativsystemer
Linux
Du har valgt: Red Hat Linux
Nullstill
Filter
Ferdig

-

Oslo Stockholms län Og 1 annet sted 3 timer 515 EUR
31 Aug
05 Oct
26 Oct
The exam tests to determine if your knowledge, skill, and ability meet those required of a senior system administrator responsible for RHEL systems. [+]
This exam and the exam objectives provided here are based on the Red Hat® Enterprise Linux® 7 version of the exam. The performance-based Red Hat Certified Engineer exam (EX300) tests to determine if your knowledge, skill, and ability meet those required of a senior system administrator responsible for Red Hat Enterprise Linux (RHEL) systems. Red Hat Certified System Administrator (RHCSA) certification is required to earn RHCE certification. An RHCE certification is earned by a Red Hat Certified System Administrator (RHCSA) who has demonstrated the knowledge, skill, and ability required of a senior system administrator responsible for Red Hat Enterprise Linux systems.   Study points for the exam RHCE exam candidates should consult the RHCSA exam objectives and be capable of RHCSA-level tasks, as some of these skills may be required in order to meet RHCE exam objectives. Red Hat reserves the right to add, modify, and remove objectives. Such changes will be made public in advance through revisions to this document. RHCE exam candidates should be able to accomplish the following without assistance. These have been grouped into several categories.   System Configuration and Management  Use network teaming or bonding to configure aggregated network links between two Red Hat Enterprise Linux systems Configure IPv6 addresses and perform basic IPv6 troubleshooting Route IP traffic and create static routes Use firewalld and associated mechanisms such as rich rules, zones and custom rules, to implement packet filtering and configure network address translation (NAT) Use /proc/sys and sysctl to modify and set kernel runtime parameters Configure a system to authenticate using Kerberos Configure a system as either an iSCSI target or initiator that persistently mounts an iSCSI target Produce and deliver reports on system utilization (processor, memory, disk, and network) Use shell scripting to automate system maintenance tasks   Network Services Network services are an important subset of the exam objectives. RHCE candidates should be capable of meeting the following objectives for each of the network services listed below:  Install the packages needed to provide the service Configure SELinux to support the service Use SELinux port labeling to allow services to use non-standard ports Configure the service to start when the system is booted Configure the service for basic operation Configure host-based and user-based security for the service HTTP/HTTPS Configure a virtual host Configure private directories Deploy a basic CGI application Configure group-managed content Configure TLS security DNS Configure a caching-only name server Troubleshoot DNS client issues NFS Provide network shares to specific clients Provide network shares suitable for group collaboration Use Kerberos to control access to NFS network shares SMB Provide network shares to specific clients Provide network shares suitable for group collaboration Use Kerberos to authenticate access to shared directories SMTP Configure a system to forward all email to a central mail server SSH Configure key-based authentication Configure additional options described in documentation NTP Synchronize time using other NTP peers Database services Install and configure MariaDB Backup and restore a database Create a simple database schema Perform simple SQL queries against a database [-]
Les mer
Stockholms län Hvidovre Og 1 annet sted 2 timer 515 EUR
12 Oct
12 Oct
26 Oct
This exam and the exam objectives provided here are based on the Red Hat® Enterprise Linux® 7 version of the exam. [+]
This exam and the exam objectives provided here are based on the Red Hat® Enterprise Linux® 7 version of the exam. We are offering Red Hat Certified System Administrator (RHCSA) Exam (EX200) on Red Hat Enterprise Linux 6 via onsite and Individual Exam Sessions.   The performance-based RHCSA exam (EX200) tests your knowledge and skill in areas of system administration common across a wide range of environments and deployment scenarios. You must be an RHCSA to earn a Red Hat Certified Engineer (RHCE®) certification. The skills tested in this exam are the foundation for system administration across all Red Hat products. An RHCSA certification is earned when an IT professional demonstrates the core system-administration skills required in Red Hat Enterprise Linux environments.     What you need to know Red Hat encourages all candidates for RHCSA to consider taking one or more of its official training courses to help prepare. Attendance in these classes is not required, and one can choose to take just an exam. Many successful candidates who have come to class already possessing substantial skills and knowledge report that the class made a positive difference for them.   To help you determine the best courses to take, Red Hat provides an online skills assessment.   While attending Red Hat's classes can be an important part of one's preparation, attending class does not guarantee success on the exam. Previous experience, practice, and native aptitude are also important determinants of success.   Many books and other resources on system administration for Red Hat's products are available. Red Hat does not endorse any as preparation guides for any exams. Nevertheless, candidates may find additional reading deepens understanding and can prove helpful.   Exam format   The RHCSA exam is a performance-based evaluation of Red Hat Enterprise Linux system administration skills and knowledge. Candidates perform a number of routine system administration tasks and are evaluated on whether they have met specific objective criteria. Performance-based testing means that candidates must perform tasks similar to what they must perform on the job.   The RHCSA exam is a hands-on, practical exam that lasts 2.5 hours. Internet access is not provided during the exam. Outside materials are not permitted. Documentation that ships with Red Hat Enterprise Linux is available during the exam. Red Hat reserves the right to make changes to format, including timing and the policies above. Such changes will be made public in advance through revisions to this document.   Study points for the exam Red Hat reserves the right to add, modify, and remove objectives. Such changes will be made public in advance through revisions to this document. RHCSA exam candidates should be able to accomplish the tasks below without assistance. These have been grouped into several categories. Understand and use essential tools Access a shell prompt and issue commands with correct syntax Use input-output redirection (>, >>, |, 2>, etc.) Use grep and regular expressions to analyze text Access remote systems using ssh Log in and switch users in multiuser targets Archive, compress, unpack, and uncompress files using tar, star, gzip, and bzip2 Create and edit text files Create, delete, copy, and move files and directories Create hard and soft links List, set, and change standard ugo/rwx permissions Locate, read, and use system documentation including man, info, and files in /usr/share/doc Note: Red Hat may use applications during the exam that are not included in Red Hat Enterprise Linux for the purpose of evaluating candidate's abilities to meet this objective. Operate running systems Boot, reboot, and shut down a system normally Boot systems into different targets manually Interrupt the boot process in order to gain access to a system Identify CPU/memory intensive processes, adjust process priority with renice, and kill processes Locate and interpret system log files and journals Access a virtual machine's console Start and stop virtual machines Start, stop, and check the status of network services Securely transfer files between systems Configure local storage List, create, delete partitions on MBR and GPT disks Create and remove physical volumes, assign physical volumes to volume groups, and create and delete logical volumes Configure systems to mount file systems at boot by Universally Unique ID (UUID) or label Add new partitions and logical volumes, and swap to a system non-destructively Create and configure file systems Create, mount, unmount, and use vfat, ext4, and xfs file systems Mount and unmount CIFS and NFS network file systems Extend existing logical volumes Create and configure set-GID directories for collaboration Create and manage Access Control Lists (ACLs) Diagnose and correct file permission problems Deploy, configure, and maintain systems Configure networking and hostname resolution statically or dynamically Schedule tasks using at and cron Start and stop services and configure services to start automatically at boot Configure systems to boot into a specific target automatically Install Red Hat Enterprise Linux automatically using Kickstart Configure a physical machine to host virtual guests Install Red Hat Enterprise Linux systems as virtual guests Configure systems to launch virtual machines at boot Configure network services to start automatically at boot Configure a system to use time services Install and update software packages from Red Hat Network, a remote repository, or from the local file system Update the kernel package appropriately to ensure a bootable system Modify the system bootloader Manage users and groups Create, delete, and modify local user accounts Change passwords and adjust password aging for local user accounts Create, delete, and modify local groups and group memberships Configure a system to use an existing authentication service for user and group information Manage security Configure firewall settings using firewall-config, firewall-cmd, or iptables Configure key-based authentication for SSH Set enforcing and permissive modes for SELinux List and identify SELinux file and process context Restore default file contexts Use boolean settings to modify system SELinux settings Diagnose and address routine SELinux policy violations [-]
Les mer
1 dag 600 EUR
The Red Hat Enterprise Performance Tuning Expertise Exam is a performance-based test of the skills covered in RH442 Red Hat Enterprise Performance Tuning. [+]
Expertise exams vary in length from 2 to 8 hours, and can only be taken by a current Red Hat Certified Engineer (RHCE). Official notification of PASS or DID NOT PASS is sent via email within 5 US business days of taking this Expertise exam. Check out the EX442 prep guide for more information about preparing for this exam. [-]
Les mer
1 dag 600 EUR
The exam tests the skills and knowledge needed to implement high-availability services on Red Hat Enterprise Linux®. [+]
The Red Hat Certificate of Expertise in Clustering and Storage Management exam (EX436) is a performance-based test of the skills and knowledge needed to implement high-availability services on Red Hat Enterprise Linux® using the Red Hat Enterprise Linux High Availability Add-on.   In preparation: Red Hat recommends that candidates earn Red Hat Certified System Administrator (RHCSA) or Red Hat Certified Engineer (RHCE) before attempting this exam but neither is required.   Study points for the exam: To help you prepare, review the exam objectives which highlights the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to perform the tasks listed below:   Configure a high-availability cluster, using either physical or virtual systems, that: Provides a service fail-over between the nodes Provides a preferred node for the service Selectively fails over based on node characteristics Manage logical volumes in a clustered environment such as: Create volumes and volume groups that are available to all members of a highly-available cluster Create snapshots of logical volumes Configure a GFS file system to: Meet specified size, layout, and performance objectives Support file system quotas Configure iSCSI targets and initiators Manage device configuration using udev Create and manage Red Hat Storage based clusters including: Creating distributed clusters Creating replicated clusters Implementing and utilizing appropriate file systems   As with all Red Hat performance-based exams, configurations must persist after reboot without intervention.   [-]
Les mer
1 dag 600 EUR
Demonstrates a system administrator's ability to deploy and manage virtual hosts in production environments using Red Hat Enterprise Virtualization. [+]
The Red Hat Certified Virtualization Administrator (RHCVA) certification demonstrates a system administrator's ability to deploy and manage virtual hosts in production environments using Red Hat Enterprise Virtualization. In preparation To take the RHCVA exam, you should be able to: Use Microsoft Windows operating systems Install software on Microsoft Windows operating systems Note: The objective of this exam is to test candidates' abilities to use Red Hat Enterprise Virtualization to implement Linux® and Windows virtual systems. It is not a test of one's ability to administer particular operating systems. Nevertheless, system administration experience in both Linux and Windows environments can be useful. Red Hat Enterprise Virtualization installation, configuration, and use You should be able to perform the following tasks: Install Red Hat Enterprise Virtualization Manager and any dependencies Use Red Hat Enterprise Virtualization Manager to: Create datacenters and clusters Manage hypervisor hosts Configure storage Create Red Hat Enterprise Linux and Microsoft Windows virtual machines Develop pools and templates Set up Red Hat Enterprise Virtualization Manager users Install and configure a Red Hat Virtualization Hypervisor to support guests and attach to a Red Hat Enterprise Virtualization Manager Import installation media for creating new virtual machines Perform management tasks, such as collecting logs, creating bookmarks for specific events, and more As with all Red Hat performance-based exams, configurations must be persistent across reboots. What you need to know Red Hat encourages all candidates for the RHCVA Exam (EX318) to consider attending the Red Hat Enterprise Virtualization (RH318) training course. Attendance in this class is not required. While attending Red Hat classes can be an important part of one's preparation to take this exam, attending class does not guarantee success on the exam. Previous experience, practice, and native aptitude are also important determinants of success. Many books and other resources on system administration for Red Hat's products are available. Red Hat does not officially endorse any as preparation guides for its exam. Nevertheless, you may find additional reading deepens understanding and can prove helpful. Exam format This exam is a performance-based evaluation of system administration skills and knowledge. Candidates perform a number of routine system administration tasks and are evaluated on whether they have met specific objective criteria. Performance-based testing means that candidates must perform tasks similar to what they perform on the job. The Red Hat Certified Virtualization Administrator (RHCVA) exam (EX318) is a single-section exam lasting 3 hours. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request.   [-]
Les mer
4 timer 600 EUR
The Red Hat Certificate of Expertise in Server Hardening exam (EX413) tests candidates' knowledge, skills, and abilities to apply standards-based best practices. [+]
Study points for the exam To help you prepare, review the exam objectives which highlights the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates for the Red Hat Certificate of Expertise in Server Hardening should be able to perform the following tasks: Identify Red Hat Common Vulnerabilities and Exposures (CVEs) and Red Hat Security Advisories (RHSAs) and selectively update systems based on this information Verify package security and validity Identify and employ standards-based practices for configuring file system security, create and use encrypted file systems, tune file system features, and use specific mount options to restrict access to file system volumes Configure default permissions for users and use special file permissions, attributes, and access control lists (ACLs) to control access to files Install and use intrusion detection capabilities in Red Hat Enterprise Linux to monitor critical system files Manage user account security and user password security Manage system login security using pluggable authentication modules (PAM) Configure console security by disabling features that allow systems to be rebooted or powered off using bootloader passwords Configure system-wide acceptable use notifications Install, configure, and manage identity management services and configure identity management clients Configure remote system logging services, configure system logging, and manage system log files using mechanisms such as log rotation and compression Configure system auditing services and review audit reports Use network scanning tools to identify open network service ports and configure and troubleshoot system firewalling As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. [-]
Les mer
Oslo 3 timer 600 EUR
20 Sep
EX280 tests the knowledge, skills, and ability to create, configure, and manage a cloud application platform using OpenShift Enterprise by Red Hat®. [+]
The Red Hat Certificate of Expertise in Platform-as-a-Service exam (EX280) tests the knowledge, skills, and ability to create, configure, and manage a cloud application platform using OpenShift Enterprise by Red Hat®. This exam is based on OpenShift Enterprise 3. The exam based on OpenShift Enterprise 2 is available via on-site and individual exams. In preparation Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates for the Red Hat Certificate of Expertise in Platform-as-a-Service (PaaS) should be able to perform these tasks: Install and configure OpenShift Enterprise by Red Hat master and node hosts. Configure OpenShift Enterprise so that applications can be securely accessed by external clients. Configure OpenShift Enterprise node properties. Create a simple OpenShift Enterprise project. Configure resource limits for projects. Configure persistent storage for registry use. Deploy an application from a Git repository. Edit and import application templates. Assemble an application from existing components. As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. What you need to know Red Hat encourages all candidates for the Red Hat Certificate of Expertise in PaaS exam to consider taking the OpenShift Enterprise Administration (DO280) course. Attendance in this class is not required, so one can choose to take just the exam. While attending Red Hat classes can be an important part of one's preparation to take this exam, attending class does not guarantee success on the exam. Previous experience, practice, and native aptitude are also important determinants of success. Many books and other resources on system administration for Red Hat's products are available. Red Hat does not officially endorse any as preparation guides for its exam. Nevertheless, you may find additional reading deepens understanding and can prove helpful. Exam format This exam is a performance-based evaluation of skills and knowledge required to configure and manage Red Hat OpenShift Enterprise. Candidates perform the configuration and administrative tasks necessary to deploy Red Hat OpenShift Enterprise and are evaluated on whether they have met specific objective criteria. Performance-based testing means that candidates must perform tasks similar to what they perform on the job. This exam consists of 1 section lasting 3 hours. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 US business days. Exam results are reported as total scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. [-]
Les mer
4 timer 600 EUR
Earn the Red Hat Certificate of Expertise in Deployment and Systems Management [+]
The Red Hat Certificate of Expertise in Deployment and Systems Management exam (EX403) tests candidates' knowledge, skills, and ability to use Red Hat products, including Red Hat® Enterprise Linux® and Red Hat Satellite Server, to deploy and manage systems in an efficient, scalable, replicable, and reliable manner. A Red Hat Certified Engineer (RHCE®) who passes this exam will earn a Red Hat Certificate of Expertise that also counts towards earning Red Hat Certified Architect (RHCA). This exam is based on Red Hat Satellite 6. Study points for the exam To help you prepare, the exam objectives highlight the task areas students can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Install Red Hat Satellite Server from an ISO image Create and configure organizations and locations Create and configure Red Hat Satellite users and roles Create GNU Privacy Guard (GPG) keys to sign RPMs Create and configure development life cycles Create a Puppet product repository Configure Red Hat Satellite subscriptions, content, and content views Install a Red Hat Satellite capsule server using an ISO image Build a custom RPM from a source tarball Create a Red Hat Satellite activation key Create a Red Hat Satellite host group Define smart class parameters for a Puppet module Register an existing client to a Red Hat Satellite server Apply errata to client Configure bare-metal deployment on Red Hat Satellite Deploy clients using kick starts As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. What you need to know Red Hat encourages all candidates for the Red Hat Certificate of Expertise in Deployment and Systems Management exam (EX403) to consider taking the Red Hat Satellite 6 Administration (RH403) course. Attendance in these classes is not required, and you can choose to take just an exam. While attending Red Hat's classes can be an important part of your preparation, attending class does not guarantee success on the exam. Previous experience, practice, and native aptitude are also important determinants of success. Many books and other resources on system administration for Red Hat's products are available. Red Hat does not endorse any as preparation guides for any exams. Nevertheless, you may find additional reading helpful to deepen your understanding. Exam format This exam is a performance-based evaluation of systems deployment and management skills and knowledge. Candidates perform a number of systems administration tasks focused on configuring Red Hat Satellite Server and then use that system to deploy client systems. Candidates are evaluated on whether they have met specific objective criteria. Performance-based testing means that candidates must perform tasks similar to what they perform on the job. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as total scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. [-]
Les mer
4 timer 600 EUR
The performance-based Red Hat Certificate of Expertise in Ansible Automation exam (EX407) tests your ability to use Ansible to automate the configuration of systems and a... [+]
The performance-based Red Hat Certificate of Expertise in Ansible Automation exam (EX407) tests your ability to use Ansible to automate the configuration of systems and applications. By passing this exam, you earn a Red Hat Certificate of Expertise that also counts towards earning a Red Hat Certified Architect (RHCA®). This exam is based on Red Hat® Enterprise Linux® 7. Red Hat recommends that candidates earn Red Hat Certified Engineer (RHCE®) or at a minimum Red Hat Certified System Administrator (RHCSA®) before attempting this exam, but neither is required. Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should have the following skills and abilities: Understand core components of Ansible Inventories Modules Variables Facts Plays Playbooks Configuration files Run ad-hoc Ansible commands Use both static and dynamic inventories to define groups of hosts Utilize an existing dynamic inventory script Create Ansible plays and playbooks Know how to work with commonly used Ansible modules Use variables to retrieve the results of running a commands Use conditionals to control play execution Configure error handling Create playbooks to configure systems to a specified state Selectively run specific tasks in playbooks using tags Create and use templates to create customized configuration files Work with Ansible variables and facts Create and work with roles Download roles from an Ansible Galaxy and use them Manage parallelism Use Ansible Vault in playbooks to protect sensitive data Install Ansible Tower and use it to manage systems Use provided documentation to look up specific information about Ansible modules and commands As with all Red Hat performance-based exams, configurations must persist after restart without intervention. Preparation Red Hat encourages all candidates for the Red Hat Certificate of Expertise in Ansible Automation exam to consider taking the Cloud Automation with Ansible course (DO407). Attendance in this class is not required to take the exam. While attending Red Hat classes can be an important part of one's preparation to take this exam, attending class does not guarantee success on the exam. Previous experience, practice, and native aptitude are also important determinants of success. Many books and other resources on system administration for Red Hat's products are available. Red Hat does not officially endorse any as preparation guides for its exams. Nevertheless, you may find additional reading deepens understanding and can prove helpful. Exam Format This exam is a performance-based evaluation of a candidate’s ability to use Ansible to automate system configuration and application deployment. Candidates will be required to develop Ansible playbooks that configure systems for specific roles and then apply those playbooks to systems to implement those roles. Candidates will also be asked to demonstrate their ability to run Ansible playbooks and configure an Ansible environment for specific behaviors. Candidates will be evaluated on whether they have met specific objective criteria. Performance-based testing means that candidates must perform tasks similar to what they perform on the job. This exam consists of one section lasting 3 hours. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as total scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. Recommended training In preparation to take this expertise exam, Red Hat recommends: Automation with Ansible (DO407)Learn to write and manage Ansible playbooks and automate system administration tools. [-]
Les mer
4 timer 600 EUR
Red Hat Certificate of Expertise in Red Hat Enterprise Linux Diagnostics and Troubleshooting [+]
Red Hat Certificate of Expertise in Red Hat Enterprise Linux Diagnostics and Troubleshooting   Prove your skills to analyze for common issues The performance-based Red Hat Certificate of Expertise in Red Hat Enterprise Linux Diagnostics and Troubleshooting (EX342) tests your ability to analyze Red Hat® Enterprise Linux® systems for common issues that may cause degradation or loss of performance and either correct the issues or gather forensic information that can be passed along to a third party. By passing this exam you earn a Red Hat Certificate of Expertise that also counts toward earning a Red Hat Certified Architect credential. In preparation Red Hat recommends that candidates earn Red Hat Certified Engineer (RHCE). Candidates should also so have some experience working with and troubleshooting Red Hat Enterprise Linux systems. Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates for the Red Hat Certificate of Expertise in Linux Diagnostics and Troubleshooting should be able to: Understand and employ general methods for troubleshooting Collect system information to aid in troubleshooting Consult documentation resources to aid in troubleshooting Monitor systems for vital characteristics Configure systems to send log messages to a centralized host Diagnose and troubleshoot system start up issues Identify and resolve service failures affecting boot Regain root control of a system Troubleshoot boot issues Identify hardware and hardware problems Manage kernel modules and their parameters Diagnose and troubleshoot file system issues Recover corrupted file systems Recover mis-configured or broken LVM configurations Recover data from encrypted file systems Identify and fix iSCSI issues Resolve package management issues Resolve package management dependency issues Recover a corrupted RPM database Identify and restore changed files Troubleshoot and fix network connectivity issues Use standard tools to verify network connectivity Identify and fix network connectivity issues Inspect network traffic to aid troubleshooting Diagnose application issues Identify library dependencies for third-party software Identify if an application suffers from memory leaks Use standard tools to debug an application Identify and fix issues related to SELinux Identify and fix authentication issues Identify and fix pluggable authentication module (PAM) issues Identify and fix LDAP and Kerberos identity management issues Gather information to aid third party investigation of issues Create kernel crashdumps Compile and execute SystemTap modules Preparation Red Hat encourages all candidates for the Red Hat Certificate of Expertise in Red Hat Enterprise Linux Diagnostics and Troubleshooting to consider taking the Red Hat Enterprise Linux Diagnostics and Troubleshooting (RH342) course. Although, attendance in this class is not required to take the exam. While attending Red Hat classes can be an important part of one's preparation to take this exam, attending class does not guarantee success on the exam. Previous experience, practice, and native aptitude are also important determinants of success. Many books and other resources on system administration for Red Hat's products are available. Red Hat does not officially endorse any as preparation guides for its exams. Nevertheless, you may find additional reading deepens understanding and can prove helpful. Exam Format This exam is a performance-based evaluation of candidates ability to diagnose and fix or otherwise troubleshoot common problems and issues encountered when working with Red Hat Enterprise Linux. Candidates will be required to analyze and in some cases resolve issues with one or more systems and the applications running on them. Performance-based testing means that candidates must perform tasks similar to what they perform on the job. This exam consists of one section lasting 4 hours. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as total scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. [-]
Les mer
1 dag 600 EUR
The Red Hat Certified System Administrator in Red Hat OpenStack exam (EX210) tests candidates skills, knowledge and abilities needed to create, configure, and manage priv... [+]
The Red Hat Certified System Administrator in Red Hat OpenStack exam (EX210) tests candidates skills, knowledge and abilities needed to create, configure, and manage private clouds using the Red Hat Enterprise Linux® OpenStack® Platform. The Red Hat Certified System Administrator in Red Hat OpenStack exam (EX210) tests candidates skills, knowledge and abilities needed to create, configure, and manage private clouds using the Red Hat Enterprise Linux® OpenStack® Platform. An IT professional who has earned the Red Hat Certified System Administrator in Red Hat OpenStack has demonstrated the skills, knowledge, and abilities needed to create, configure, and manage private clouds using Red Hat Enterprise Linux OpenStack Platform. Language: Spoken language in the training will be english unless all students are comfortable/familiar with norwegian. Training material is in english.   Study points for the exam Red Hat reserves the right to add, modify, and remove objectives. Such changes will be made public in advance through revisions to this document.   Candidates for the Red Hat Certified System Administrator in Red Hat OpenStack should be able to perform the following tasks: Install and configure Red Hat Enterprise Linux OpenStack Platform Manage users Manage projects Manage flavors Manage roles Set quotas Manage images Configure images at instantiation Add additional compute nodes Manage Swift storage Manage networking Manage Cinder storage As with all Red Hat performance-based exams, configurations must persist after reboot without intervention.   Preparation for the Red Hat Certified System Administrator in Red Hat OpenStack Red Hat encourages all candidates for the Red Hat Certified System Administrator in Red Hat OpenStack to consider taking the Red Hat OpenStack Administration (CL210) course. Attendance in this class is not required, so one can choose to take just the exam.   While attending Red Hat classes can be an important part of one's preparation to take this exam, attending class does not guarantee success on the exam. Previous experience, practice, and native aptitude are also important determinants of success.   Many books and other resources on system administration for Red Hat's products are available. Red Hat does not officially endorse any as preparation guides for its exam. Nevertheless, you may find additional reading deepens understanding and can prove helpful.   Exam format This exam is a performance-based evaluation of Red Hat OpenStack skills and knowledge. Candidates perform a number of systems administration tasks focused on configuring and administering an OpenStack cloud and are evaluated on whether they have met specific objective criteria. Performance-based testing means that candidates must perform tasks similar to what they perform on the job.   This exam consists of one section lasting 3 hours.   Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days.   Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. [-]
Les mer
3 timer 705 EUR
Tests your ability to integrate Enterprise Linux® OpenStack® Platform services with RH Ceph Storage and implement advanced networking features. [+]
The Red Hat Certified Engineer (RHCE) in Red Hat OpenStack exam (EX310) is a performance-based exam that tests your ability to integrate Red Hat® Enterprise Linux® OpenStack® Platform services with Red Hat Ceph Storage and implement advanced networking features utilizing the OpenStack Neutron service. In order to become a Red Hat Certified Engineer in Red Hat OpenStack, you must also be a current Red Hat Certified System Administrator (RHCSA) in Red Hat OpenStack.   In preparation Red Hat recommends that candidates earn RHCSA before attempting this exam, but it is not required. Note: To earn the RHCE in Red Hat OpenStack credential, you must be a RHCSA in Red Hat OpenStack and also pass the RHCE in Red Hat OpenStack exam. While it is possible to take these exams out of sequence, Red Hat strongly recommends earning the RHCSA in Red Hat OpenStack first. Study points for the exam To help you prepare, the exam objectives highlight the task areas you can expect to see covered in the exam. Red Hat reserves the right to add, modify, and remove exam objectives. Such changes will be made public in advance. Candidates should be able to do the following: Perform common administrative tasks on an existing Red Hat Enterprise Linux OpenStack Platform installation Install and configure Red Hat Ceph Storage in a multi-node environment: Configure object storage devices Configure monitor nodes Configure Ceph block devices Create snapshots of Ceph block devices Configure and utilize the Ceph Calamari Integrate Ceph block devices with OpenStack services such as Glance, Cinder, and Nova Create and work with virtual network devices Provision tenant networks with DHCP agents Manage network ports and VLANs Create instances and attach them to specific VLANs Create and manage floating IP addresses Configure Load Balancing-as-a-Service (LBaaS) Troubleshoot virtual network devices As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Red Hat encourages all candidates for the RHCE in Red Hat OpenStack exam (EX310) to consider taking the Red Hat OpenStack Administration III (CL310) course. Attendance in this class is not required to take the exam. While attending Red Hat Training courses can be an important part of your preparation to take this exam, attending the course does not guarantee success on the exam. Previous experience, practice, and native aptitude are also important determinants of success. Many books and other resources on system administration for Red Hat's products are available. Red Hat does not endorse any as preparation guides for any exams. Nevertheless, candidates may find additional reading deepens understanding and can prove helpful. Exam format This exam is a performance-based evaluation of Red Hat Enterprise Linux OpenStack Platform and Red Hat Ceph Storage administration skills and knowledge. Candidates perform a number of routine administration and configuration tasks and are evaluated on whether they have met specific objective criteria. Performance-based testing means that candidates must perform tasks similar to what they perform on the job. This exam consists of 1 section lasting 3 hours. Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. [-]
Les mer
2 timer 1 000 EUR
The performance-based Red Hat® Certificate of Expertise in Hybrid Cloud Storage exam (EX236) tests your ability to configure Red Hat Gluster Storage and clients. [+]
 A Red Hat Certificate of Expertise in Hybrid Cloud Storage is earned when an IT professional demonstrates the ability to implement storage solutions using Red Hat Gluster Storage and to configure clients to use this storage. To earn this certificate, you must pass the Red Hat Certificate of Expertise in Hybrid Cloud Storage exam.   Install Red Hat Storage Server on both physical and virtual systems and work with existing Red Hat Storage Server appliances Configure a Red Hat Storage Server storage pool Create individual storage bricks on either physical devices or logical volumes Create various Red Hat Storage Server volumes such as: Distributed Replicated Distributed-replicated Stripe-replicated Distributed-striped Distributed-striped-replicated Format the volumes with an appropriate file system Create Red Hat Storage Server volume snapshots Extend existing storage volumes by adding additional bricks and performing appropriate rebalancing operations Configure clients to use Red Hat Storage Server appliance volumes using native and network file systems (NFS) Configure clients to use Red Hat Storage Server appliance volumes using SMB Configure Red Hat Storage Server features including disk quotas and POSIX access control lists (ACLs) Configure IP failover for NFS-and SMB-based cluster services Configure geo-replication services Configure unified object storage Configure Red Hat Storage Server to support Hadoop Troubleshoot Red Hat Storage Server problems Monitor Red Hat Storage Server workloads Perform Red Hat Storage Server management tasks such as tuning volume options, volume migration, stopping and deleting volumes, and configuring server-side quorum As with all Red Hat performance-based exams, configurations must persist after reboot without intervention. Red Hat encourages all candidates for the Red Hat Certificate of Expertise in Hybrid Cloud Storage exam (EX236) to consider taking the Red Hat Gluster Storage Administration (RH236) course. Attendance in this class is not required to take the exam. While attending Red Hat classes can be an important part of your preparation to take this exam, attending class does not guarantee success on the exam. Previous experience, practice, and native aptitude are also important determinants of success. Many books and other resources on system administration for Red Hat's products are available. Red Hat does not officially endorse any as preparation guides for its exam. Nevertheless, you may find additional reading deepens understanding and can prove helpful. Exam format This exam is a performance-based evaluation of storage administration skills and knowledge. To get certified, you must perform a number of routine storage administration tasks and are evaluated on whether you have met specific objective criteria. Performance-based testing means that candidates must perform tasks similar to what they perform on the job. The exam is organized as follows: Storage Server administration: 2 hours Scores and reporting Official scores for exams come exclusively from Red Hat Certification Central. Red Hat does not authorize examiners or training partners to report results to candidates directly. Scores on the exam are usually reported within 3 U.S. business days. Exam results are reported as section scores. Red Hat does not report performance on individual items, nor will it provide additional information upon request. [-]
Les mer
Hvidovre Strömstad 2 dager 1 400 EUR
08 Oct
22 Oct
Take your automation to the next level with Ansible Tower [+]
Automation with Ansible II: Ansible Tower (DO409) is designed for IT professionals who use Ansible by Red Hat® and need to centrally manage their Ansible projects in a way that scales to large teams and complex enterprise installations using Ansible Tower by Red Hat. This Ansible training is based on Ansible Tower 3, Ansible 2, and Red Hat Enterprise Linux® 7.   This course will teach students how to deploy and use Ansible Tower by Red Hat to manage their existing Ansible projects, playbooks, and roles, perform basic maintenance and administration of the Ansible Tower installation, and configure users and teams and use them to control access to systems, projects, and other resources through role-based access controls. Students will also learn to use the visual dashboard to centrally launch, control, and monitor Ansible jobs, use the Ansible Tower application programming interface (API) to launch jobs from existing templates, and automatically schedule Ansible jobs and update the host inventory. Course summary Install Ansible Tower by Red Hat Configure users and teams to access Ansible Tower resources using role-based access controls Use Ansible Tower to manage shared access to inventories and machine credentials Create job templates and workflow job templates to standardize playbook execution Launch playbooks and monitor and review job results using Ansible Tower Outline for this course Course introductionIntroduce and review the course.Install Ansible Tower by Red Hat and describe its architectureExplain what Ansible Tower is and demonstrate a basic ability to navigate and use its web user interface.Create users and teams for role-based access controlCreate user accounts and organize them into teams that can be used in conjunction with role-based access control to manage administration and access to organization resources in Ansible Tower.Create and manage inventories and credentialsCreate inventories of machines to manage and set up credentials that will allow Ansible Tower to run jobs on those systems.Manage projects for provisioning with Ansible TowerCreate basic projects and job templates in Ansible Tower that can be used to run Ansible playbooks in order to provision and configure managed systems.Construct advanced job workflowsUse additional features of job templates to improve workflows by creating simple job launch forms, templates to launch multiple jobs in sequence, and to report job success or failure through external notification systems.Update inventories dynamically and compare inventory membersUse advanced techniques to work with inventories, including dynamic generation of inventories from centralized information sources and monitoring of hosts in an inventory for configuration deviations or differences.Maintenance and administration of Ansible TowerPerform routine maintenance and administration on Ansible Tower and get a basic familiarity with the command line tools and Ansible Tower API.Comprehensive review of provisioning and managing systems using Ansible TowerDemonstrate skills learned in this course by using a provided specification to configure and operate a new organization in Ansible Tower with certain users and teams, an inventory of hosts to manage, and an Ansible project containing playbooks and other supporting files. [-]
Les mer
Oslo 3 dager 2 100 EUR
17 Sep
Learn to install, configure, and manage instances. [+]
OpenShift Enterprise Administration (DO280) prepares the system administrator to install, configure, and manage OpenShift Enterprise by Red Hat® instances. OpenShift Enterprise, Red Hat's platform-as-a-service (PaaS) offering, provides pre-defined deployment environments for applications of all types through its use of container technology. This creates an environment that supports DevOps principles such as reduced time to market and continuous delivery. Course overview OpenShift Enterprise is a key technology in Red Hat's DevOps story. Using PaaS has proven to accelerate time to market for many organizations. This course provides the knowledge to take advantage of the platform in a popular DevOps environment. In this course, students will learn how to install and configure an instance of OpenShift Enterprise, test the instance by deploying a real world application, and manage projects/applications through hands-on labs. Course summary Container concepts Configuring resources with the command line interface Building a pod Enabling services for a pod Creating routes Downloading and configuring images Rolling back and activating deployments Creating custom S2I images Comprehensive review Outline for this course Introduction to Red Hat OpenShift EnterpriseReview features and architecture of OpenShift Enterprise.Install OpenShift EnterpriseInstall OpenShift Enterprise and configure a master and node.Execute commandsExecute commands using the command line interface.Build applicationsCreate, build, and deploy applications to an OpenShift Enterprise instance.Persistent storageProvision persistent storage and use it for the internal registry.Build applications with source-to-image (S2I)Create and build applications with S2I and templates.Manage the systemUse OpenShift Enterprise components to manage deployed applications.Customize OpenShift EnterpriseCustomize resources and processes used by OpenShift Enterprise.Comprehensive reviewPractice and demonstrate knowledge and skills learned in the course. Language: Spoken language in the training will be english unless all students are comfortable/familiar with norwegian. Training material is in english. [-]
Les mer

Lukk Denne siden benytter seg av informasjonskapsler (cookies).
Du kan fortsette å bruke siden som vanlig hvis du godtar dette. Les mer om bruk av informasjonskapsler i vår personvernerklæring.